Vibrating Centrifuges

We design & manufacture the most efficient & robust vibrating coal dewatering centrifuges for the most demanding applications around the world.

TESTIMONIALS: UK Coal Mining Limited         Derek Parnaby Cyclones International Limited

Advantages of the Don Valley Engineering Coal Dewatering Centrifuge:-

  • Capacities up to 300 t.p.h.
  • Continuous separation of solids from liquids
  • Proven high-efficiency dewatering ability
  • Full dynamic balancing
  • Overload protected self-cleaning system
  • Easy access and maintenance
  • Lubrication failure cut-out
  • Full Service Support
  • Spare Parts and Baskets always in Stock
  • Full Design and Installation Service

Our commitment to product development has resulted in our most recent coal dewatering centrifuges providing increased economic savings, through the improved reduction of moisture from coal, and a wide range of minerals.

Through excellence in design and engineering, these fully self-contained machines require only support structures and feed / discharge chutes, all of which can be included in a complete installation and commissioning package, provided by Don Valley Engineering or our regional representatives.

Description of Operation

Wet solids are presented continuously to the small diameter of a tapered wedge wire basket via the feed inlet. Solids are retained in the rotating basket and horizontal vibrations assist in transporting them to the large diameter open end. Water passes through the basket due to the high centrifugal forces produced.

Get Your Centrifuge Specified by the Experts

Our application engineers will be pleased to provide you with specification for the best Dewatering Centrifuge for your requirements. Kindly provide the following basic information:-

  1. Type of material
  2. Size analysis of feed material
  3. Feed rate (t.p.h.)
  4. Separation sizes required
  5. Moisture content

FREE VIBRATING CENTRIFUGE SPECIFICATION SERVICE: Click here

 

Vibrating Centrifuges - Range of models: -
TYPE HSL
500		 HSL
600
 HSL
750		 HSG
1000		 HSG
1100		 HSG
1200		 HSG
1300		 HSG
1400
Typical Feed
Capacities tph		 15/20 20/30 40/50 50/100 100/150 150/200 200/250 250/300
Drive Motor kw 7.5 7.5 7.5 22 30 37 55 55
Length mm 1500 1500 1500 2260 2425 2425 2900 2900
Width mm 1373 1373 1480 1880 2010 2035 2225 2225
Height mm 1329 1329 1412 1705 1845 1945 2090 2115
Weight approx kg 1100 1100 1500 3600 4100 4530 7000 7500

 

Don Valley Engineering COAL DEWATERING CENTRIFUGES are capable of accepting a feed up to 50 mm top size and in order to obtain best de-watering, the process may require additional water to the feed material, prior to entry to the vibrating centrifuge chamber.