Banana Linear Motion Screens
GLOBAL SCREEN SPECIALISTS
Higher Feed Rate - Smaller Footprint - Higher Efficiency - Lower Power
Our Banana Screens employ the latest technology in multi-angle machines which are capable of achieving exceptional throughputs for relatively small screening areas. The screens include a number of different screening angles with a wide variety of deck types and apertures to meet the particular process requirements.
The screens are designed to accept most types of deck system including polyurethane, punched steel plate and wedge wire.
Screens vary in size from 1600mm wide up to 3400mm wide with masses up to 28 tonne.
- Heavy Duty Screens for Heavy Duty Applications
- Designed for all Screening Applications
The Banana Screen benefits from utilising linear motion combined with high vibration amplitude and high acceleration over the screen deck. This makes the Banana Screen suitable for a variety of applications. These combined features also reduce the possibility of blinding and pegging.
The Benefits of Multi Angle Screening are:-
- Improved efficiency in sizing material due to formation of a thin bed depth.
- Lower water consumption, with wet screening.
- Lower energy requirement, for an equivalent throughput on a conventional flat deck screen.
- Higher feed rates for an equivalent deck area.
Get your Banana Screen Specified by the Experts!
Our application engineers will be pleased to provide you with a fully detailed specification of the Banana Screen you require, based on receiving the following information:-
- Type of material
- Size analysis of feed material
- Feed rate (TPH)
- Separation sizes required
- Moisture content
Free Specification Service: click here
Case Studies: Under Construction
| Effective Width |
1600 to 4000 mm |
| Effective Length |
3800 to 10500 mm |
| Screen Area |
6m² to 32m² |
| Vibratory Motion |
Linear |
| Amplitude |
Up to 15 mm |
| Frequency / Speed |
850 to 950 cycles / minute |
| Angle of Throw |
To suit application |
| Inclination |
To suit application, typically 30°, 20° & 5° |
| Flow Speed |
2.5 m/s to 0.5 m/s |
| Capacity |
Up to 4000 TPH, depending on material and aperture size |